Product Code: 104200 (11 HP)
Product Code: 104202 (13 HP)

The ASE Tazmanian Single Blade Roof Cutter is available with in 2 different engine types. It has belts that are easily changed in minutes and is equipped with a sealed breather system that will increase engine lifespan.


The Tazmanian Single Blade Roof Cutter comes with a set of additional features:

  • Long Cutting Shaft - With the support of dual flange bearings over a long shaft length the vibration is reduced. This reduction in shaft vibration is key to increasing the life of both the cutting blade and belts. With the blade away from the belts, less debris gets into the belt area of the machine; reducing belt wear.
  • Controlled Cutting Depth - Cutting depth is controlled easily through the depth control lever located at the operators' right side. With a heavy duty sealed bearing in place the lever is easy to control and the tight threads located at the front near the wheel allow a wide range of cutting depths. With the blade on the opposite side from the depth control threads, dirt buildup is reduced and because the threads are closed at one end, shaft bending is prevented.
  • Sealed Engine Breather - This cover is bolted and sealed directly to the side of the engine, preventing most particles from entering the machine at engine level. Cleaner air from the top of the machine is drawn in through the breather hose, reducing the amount of dirt buildup on the starter fan. This increases engine life. With the reduction in airborne debris entering the engine, less buildup occurs in the cooling system, increasing engine life.
  • Quick Belt Changes - With the belts contained behind a hinged cover, belt changes are quick and painless. Simply open the over, lower the idler and change the belts. There are no bearings to remove or pulleys to adjust. Belt changes can be accomplished in just minutes compared to almost an hour on other roof cutting machines. The spring controlled idler also acts to maintain tension, increasing belt life. ALL SEASONS EQUIPMENT uses twin 'V' style belts on all roof cutters. 'V' style belts are wider and more durable that 'A' belts for tough roofing conditions.

The a solid cutting device.

*Specifications are subject to change without notice.

System Information and Specs
Engine Types: 11 HP
13 HP
Max Cutting Depth: With 12" blade: 3"
With 14" blade: 4"
Dimensions: 60" x 27" x 45"
Weight: 242 lbs


Download all essential technical resources here

Attachments & Recommended Products

The products that makes your life easier

Roof Cutting Blades

Product Code: 204024 (Straight 12")
Product Code: 204028 (Straight 14")
Product Code: 204020 (Tri-Blade)

The carbide cutting angle ensures maximum surface contact to slice through material while minimizing the force of the blade impact to reduce the strain on the roof cutter engine.

  • Designed to fit all makes and models of roof cutters with a 1" mounting hole and 12" diameter cut profile.
  • Even at 2.5" cutting depth, the cutting edge clears the roof profile before beginning the next cut, reducing the strain on the engine.
  • Full 2.25" long by 0.25 wide carbide tips.
  • 12" and 14" overall lengths.

Attachment prices and uses may vary.
List items (OR asterisk * ) denotes an important note.


Hydraulic Sweeper

This 44’’ sweeper allows you to sweep forward, to the left or to the right depending on your needs. The brush rotation speed is adjustable. A high rotation speed will be used to throw debris and snow a fair distance or a slower speed will be used when keeping debris like stones and rubble closer to the brush is important.