HYDRAULIC POWER BUGGY
Product Code:
•105602 | Stand-on
•105604 | W/Single-Valve – Walk-behind + Flat-free
•105607 | W/Single-Valve – Stand-on – Flat-free
•105608 | W/Dual-Valve – Stand-on, No Counterweights
•105614 | W/Single-Valve – Walk-behind
•Call for Other Option
KEY SPECIFICATIONS OF HYDRAULIC POWER BUGGY
The Hydraulic Power Buggy comes with a set of additional features:
- Hydraulic driven (Hydraulic Motor and Chain Drive).
- 8 Gallon Hydraulic Reservoir.
- Forward and reverse movement controlled by control lever.
- Speed controlled by engine RPM.
- Dual Valve System allows for the quick removal and exchange of various attachments which are powered by a new Large Hydraulic Motor.
- Motor is equipped with a 'Motion Control Valve' which acts as a breaking system; allowing for better control driving on both an incline and decline.
- All workhorse attachments are interchangeable and work on both the Hydraulic and Mechanical unit.
A solid workforce device.
*Dual Valve System must be purchased seperately.
*Specifications are subject to change without notice.
| System Information and Specs | |
|---|---|
| Engine Types: | 9 HP Honda |
| Dimensions: | xxx" x xxx" x xxx" |
| Weight: | 450 lbs |
Attachments & Recommended Products
Chariot Attachment
Product Code: 105700 (Complete with Swivel)
Product Code: 105702 (" " Foam-Filled Wheels)
| Attachment Specifications | |
|---|---|
| Weight | 92 lbs. (Without Basket) |
| Dimensions | 12" x 19" x 9" (Platform) |
An optional stand-on attachment is easily attached to the rear of the machine allowing the operator to ride while towing 4 wheel trailers.
This attachment is recommended as the maximum speed of this machine is too fast for the operator to keep up with for extended periods of time.
HydraLift Attachment
Product Code: 105813 (System only, Forks not included)
Product Code: 105819 (Fork Attachment only)
| Attachment Specifications | |
|---|---|
| Lifting Capacity | 600 lbs. |
| Fork Dimensions | 46" x 30" |
| Fork Spacing | Fork: 30" |
| Weight | 214 lbs. |
| Dimensions | 76 7/16" x 39" x 21 3/4" |
A new modular system with multiple future attachments that will couple to the machine easily using a pin system.
Bucket Attachment - Standard
Product Code: 105800
| Attachment Specifications | |
|---|---|
| Weight | 98 lbs. (Bucket Only) 548 lbs. (Attached) |
| Dimensions | 47" x 36" x 12" |
This system option allows larger quantities of material to be transported in a single trip.
Bucket Attachment - Large
Product Code: 105807
| Attachment Specifications | |
|---|---|
| Weight | 152 lbs. (Bucket Only) 602 lbs. (Attached) |
| Dimensions | 47" x 36" x 24" |
The large bucket can be used with an optional Hydraulic Dumping System. This system option allows larger quantities of material to be transported in a single trip.
Gravel Spreader Attachment
Product Code: 105801
| Attachment Specifications | |
|---|---|
| Capacity | 7.6 cu.ft. |
| Weight | 110 lbs. (Speader Only) 560 lbs. (Attached) |
| Dimensions | 24" x 36" x 27" |
An attachable unit that evenly spreads gravel along the rooftop.
55 Gallon Insulated Tank Attachment
Product Code: 105804 (Rods and Channels)
Product Code: 103326 (With Draincock)
| Attachment Specifications | |
|---|---|
| Weight | 75 lbs. |
| Dimensions | XXX" x XXX" x XXX" |
Used to transport and dispense hot asphalt on rooftops.
Fork Attachment
Product Code: 105802
| Attachment Specifications | |
|---|---|
| Weight | 56 lbs. |
| Dimensions | 48" x 35.5" x 20" |
Used to carry various roofing material.
Dump Bucket System
Product Code: 105820
A hydraulic dump bucket system that connects to the new hydraulic valve system.
Attachment prices and uses may vary.
List items (OR asterisk * ) denotes an important note.